Product Search

Sort by:
Filter Results

USA Made Twill Five Panel Adjustable - Solid Eyelets - Union Made

# 5CTSVE45 15 day production time$11.99 - $13.03 | Min Qty 24

An american made five panel hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a twill five panel hat. The color treatment is solid color throughout with embroidered eyelets. Eyelets are embroidered, not metal. 36 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for customer referral incentive gifts, President's Club hats, charity run 5k hats, and ribbon cutting ceremony gifts, for clients like hotels, consumer electronics companies, blood donation centers, and utlitities. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A USA made 5 panel hat carrying a union bug — one of the few twill 5 panel cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a trade show baseball cap and a twill five panel hat. Also listed under: twill five panel hat union made.

USA Made Brushed Cotton Prostyle Adjustable - Two Tone - Union Made

# 6BCSVO30 15 day production time$12.12 - $13.18 | Min Qty 24

A two tone baseball cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is an embroidered cap. The color treatment is contrasting button and visor. 45 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for President's Club swag, new business opening giveaways, B2B promotional items, and 'welcome to the team' gifts, for clients like restaurants, bankruptcy attorneys, beverage companies, and employee training providers. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A blank baseball cap carrying a union bug — one of the few USA made uniform cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a USA mid profile cap and an embroidered cap.

Union Made Brushed Front Mesh Back Prostyle Snapback - White Mesh - USA Made

# 6BMSPE72 15 day production time$12.27 - $13.33 | Min Qty 24

A white back trucker hat cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a white back trucker hat. The color treatment is a white back. Eyelets are embroidered, not metal. 18 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for corporate retreat swag, customer referral incentive gifts, logo hats for brand promotion, and bulk hats for walk-a-thon, for clients like restaurants, consulting firms, utlitities, and congressional campaigns. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union trucker hat carrying a union bug — one of the few mesh cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a USA made structured baseball cap and a white back trucker hat. Also listed under: caps USA, mesh back hats.

Union Made Spacer Mesh Prostyle Adjustable - Solid Color with Eyelets - USA Made

# 6SMSVE75 15 day production time$12.65 - $13.75 | Min Qty 24

A mesh baseball cap cut and sewn in Newark, New Jersey from spacer mesh, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is an adjustable structured cap. The color treatment is solid color throughout with a matching mesh back. Eyelets are embroidered, not metal. 25 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for bulk logo caps for trade shows, company logo hats for staff, cheap trade show handouts, and custom hats for sales team, for clients like carpenters, media consultants, semiconductor manufacturers, and wellness centers. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A spacer mesh structured cap carrying a union bug — one of the few adjustable mid profile cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a mesh ball cap and an adjustable structured cap.

Union Made Brushed Cotton Prostyle Adjustable - Contrast Stitch - USA Made

# 6BCSVE90 15 day production time$12.98 - $14.12 | Min Qty 24

An american made velcro back cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a structured prostyle baseball cap. The color treatment is contrast stitching and embroidered eyelets. Eyelets are embroidered, not metal. 41 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for sales incentive program gifts, custom logo hats bulk, custom hats for sales team, and corporate event swag, for clients like defense contractors, real estate agents, software developers, and beauty brands. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A Union made structured cap carrying a union bug — one of the few premium hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as an embroidered cap and a structured prostyle baseball cap. Also listed under: hat blank, blank adjustable.

Union Made Twill Dad Snapback - Contrast Back - USA Made

# 6CTUPO60 15 day production time$11.12 - $12.09 | Min Qty 24

A twill dad cap cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel unstructured crown — the dad cap shape. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a giveaway dad hat. The color treatment is contrasting back panels. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for embroidered hats for business, top performer awards, corporate golf outing gifts, and remote onboarding kit hats, for clients like truck transportation companies, police departments, mental health clinics, and trade groups. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A Twill unstructured hat carrying a union bug — one of the few twill soft crown cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill classic dad hat and a giveaway dad hat.

USA Made Stretch Twill Prostyle Stretchfit - Solid Color - Union Made

# 6CSSEO35 15 day production time$15.26 - $16.59 | Min Qty 24

A union stretch fit cap cut and sewn in Newark, New Jersey from stretch-fit poly/spandex, built on a six-panel structured crown, the shape we call prostyle. It closes with a stretch-fit back and no strap at all, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a blank pro style hat. The color treatment is solid color throughout. 23 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for marketing swag that works, executive gift box, channel partner program swag, and eco-friendly branded hats, for clients like polling companies, semiconductor manufacturers, super PACs, and telecommunications carriers. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union made fitted cap carrying a union bug — one of the few promotional baseball cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a giveaway cap and a blank pro style hat.

Union Made Mesh Back Dad Adjustable - Contrast Mesh Back - USA Made

# 6CMUVO70 15 day production time$11.21 - $12.19 | Min Qty 24

A mesh back dad hat cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel unstructured crown — the dad cap shape with a breathable mesh back. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is an unstructured hat. The color treatment is a contrasting mesh back. 44 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for fundraising promotional items, refer-a-friend B2B rewards, referral partner rewards, and remote onboarding kit hats, for clients like resorts, construction firms, labor federations, and nursing homes. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union unstructured hat carrying a union bug — one of the few dad hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a mesh back adjustable cap and an unstructured hat.

Union Made Brushed Cotton Five Panel Snapback - Two Tone - USA Made

# 5BCSPE40 15 day production time$12.07 - $13.11 | Min Qty 24

A blank 5 panel hat cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a five-panel structured crown. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a custom five panel hat. The color treatment is contrasting button, visor and embroidered eyelets. Eyelets are embroidered, not metal. 45 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for cheap trade show handouts, product launch swag hats, team building winner awards, and business partner gift ideas, for clients like book publishers, wellness centers, campaign consulting firms, and public utilities. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union made snapback carrying a union bug — one of the few american made 5 panel hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a chino twill snapback and a custom five panel hat.

USA Made Spacer Mesh Prostyle Adjustable - Contrast Mesh Back - Union Made

# 6SMSVO70 15 day production time$11.88 - $12.92 | Min Qty 24

A team trucker hat cut and sewn in Newark, New Jersey from spacer mesh, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a spacer mesh adjustable hat. The color treatment is a contrasting mesh back. 57 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for team building winner awards, board member gifts, customer referral incentive gifts, and corporate gifts for customers, for clients like government employees, hedge funds, magazine publishers, and truck transportation companies. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A contrast back structured cap carrying a union bug — one of the few adjustable spacer mesh cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as an athletic ball cap and a spacer mesh adjustable hat.

USA Made Brushed Front Mesh Back Prostyle Snapback - Solid Color with Eyelets - Union Made

# 6BMSPE75 15 day production time$12.27 - $13.33 | Min Qty 24

A snapback structured baseball cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a snapback mid profile cap. The color treatment is solid color throughout with a matching mesh back. Eyelets are embroidered, not metal. 26 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for sales contest rewards, local event sponsor giveaways, employee recognition program gifts, and promotional caps for events, for clients like Republican organizations, real estate brokerages, production companies, and automakers. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A Snapback structured cap carrying a union bug — one of the few 6 panel structured hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a mid profile cap and a snapback mid profile cap.

USA Made Brushed Front Mesh Back Prostyle Snapback - Contrast Mesh Back - Union Made

# 6BMSPO70 15 day production time$11.51 - $12.51 | Min Qty 24

A contrast mesh trucker cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a 6 panel trucker cap. The color treatment is a contrasting mesh back. 47 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for premium client gift hats, corporate gifts for customers, top client gift ideas, and B2B holiday gifts, for clients like banks, welders, field organizing companies, and roofers. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A USA structured cap carrying a union bug — one of the few structured cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a mesh cap and a 6 panel trucker cap.

Union Made Twill Dad Snapback - Two Tone - USA Made

# 6CTUPO30 15 day production time$11.12 - $12.09 | Min Qty 24

An american made unstructured hat cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel unstructured crown — the dad cap shape. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a twill dad hat. The color treatment is contrasting button and visor. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for bulk parade throw hats, custom golf hats with logo, team building prizes, and unique trade show giveaways, for clients like car rental companies, dental clinics, public utilities, and dental offices. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A USA made unstructured hat carrying a union bug — one of the few twill unstructured cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a giveaway snapback and a twill dad hat.

Union Made Brushed Cotton Prostyle Snapback - Sandwich Brim - USA Made

# 6BCSPE52 15 day production time$13.60 - $14.78 | Min Qty 24

A pro style cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a chino twill baseball cap. The color treatment is a contrasting sandwich visor only. Eyelets are embroidered, not metal. 41 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for team building prizes, sales motivation gifts, C-suite gift ideas, and 5k race giveaways, for clients like data analytics companies, catering companies, non profits, and unions. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A structured prostyle baseball cap carrying a union bug — one of the few blank snapback options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a snapback pro style hat and a chino twill baseball cap.

Union Made Ripstop Low Profile Five Panel Slide Buckle - Solid Eyelets - USA Made

# 5RSLTE45 15 day production time$12.66 - $13.77 | Min Qty 24

An embroidered skate hat cut and sewn in Newark, New Jersey from cotton ripstop, built on a five-panel low crown. It closes with a fabric polo strap on a metal slide buckle, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a promotional skate hat. The color treatment is solid color throughout with embroidered eyelets. Eyelets are embroidered, not metal. 26 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for local event sponsor giveaways, organic cotton custom caps, organic cotton custom caps, and staff BBQ giveaways, for clients like fintech companies, community colleges, mayoral campaigns, and bankruptcy attorneys. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union slide buckle cap carrying a union bug — one of the few union skater cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a ripstop skate hat and a promotional skate hat.

Union Made Twill Low Profile Five Panel Self Strap - Solid Color - USA Made

# 5CTLFO35 15 day production time$11.56 - $12.57 | Min Qty 24

A blank skate hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel low crown. It closes with a fabric strap with buckle and grommet, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a five panel hat. The color treatment is solid color throughout. 36 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for 'welcome to the team' gifts, sales rewards for top performers, top sales performer gifts, and branded hats for events, for clients like shipping companies, labor federations, media consultants, and motels. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A 5 panel cap carrying a union bug — one of the few USA made skater cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill skate hat and a five panel hat.

USA Made Twill High Crown Snapback - Contrast Back - Union Made

# 6CTHPO60 15 day production time$11.40 - $12.39 | Min Qty 24

A crown hat cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel high crown. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a union tall crown cap. The color treatment is contrasting back panels. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for sales contest rewards, C-suite gift ideas, incentive rewards for sales, and employee event giveaways, for clients like event planners, plumbers, event managers, and engineering firms. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A contrast back snapback carrying a union bug — one of the few twill tall crown cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill high profile cap and a union tall crown cap.

Union Made Spacer Mesh Prostyle Adjustable - Solid Color - USA Made

# 6SMSVO75 15 day production time$11.88 - $12.92 | Min Qty 24

A spacer mesh adjustable hat cut and sewn in Newark, New Jersey from spacer mesh, built on a six-panel structured crown, the shape we call prostyle with a breathable mesh back. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a USA made structured baseball cap. The color treatment is solid color throughout with a matching mesh back. 25 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for top performer awards, company swag for new employees, client appreciation swag, and business partner gift ideas, for clients like accounting firms, newspapers, food processing companies, and dental offices. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. An American made pro style hat carrying a union bug — one of the few mesh baseball cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a mesh ball cap and a USA made structured baseball cap.

Union Made Mesh Back Five Panel Trucker Snapback - Solid Color - USA Made

# 5CMSPO75 15 day production time$10.58 - $11.50 | Min Qty 24

A mesh back snapback hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown with a breathable mesh back. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a trucker cap. The color treatment is solid color throughout with a matching mesh back. 25 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for corporate event headwear, corporate gifts for remote employees, personalized baseball caps, and custom hats for walk-a-thon, for clients like chemical companies, automakers, senior centers, and shipping companies. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A snapback mesh back cap carrying a union bug — one of the few USA made trucker cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a 5 panel trucker hat and a trucker cap.

Union Made Twill Five Panel Adjustable - Contrast Back - USA Made

# 5CTSVO60 15 day production time$11.17 - $12.14 | Min Qty 24

An American made 5 panel hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a promotional 5 panel hat. The color treatment is contrasting back panels. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for new logo launch swag, bulk parade throw hats, sales competition prizes, and executive gifts promotional items, for clients like not for profit organizations, news organizations, media consultants, and restaurants. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A Bulk five panel hat carrying a union bug — one of the few USA made five panel hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill 5 panel hat and a promotional 5 panel hat.

Union Made Twill Five Panel Adjustable - Contrast Back with Eyelets - USA Made

# 5CTSVE60 15 day production time$12.00 - $13.05 | Min Qty 24

A USA made five panel cap cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a union made 5 panel cap. The color treatment is contrasting back panels. Eyelets are embroidered, not metal. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for B2B gift giving, custom logo hats bulk, company logo hats for staff, and non-monetary sales incentives, for clients like social media companies, banks, digital marketing agencies, and law firms. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. An adjustable 5 panel cap carrying a union bug — one of the few twill contrast back hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill adjustable hat and a union made 5 panel cap.

Union Made Brushed Cotton Prostyle Adjustable - Contrast Back - USA Made

# 6BCSVO60 15 day production time$12.12 - $13.18 | Min Qty 24

An adjustable mid profile cap cut and sewn in Newark, New Jersey from brushed cotton chino twill, built on a six-panel structured crown, the shape we call prostyle. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a structured hat. The color treatment is contrasting back panels. 45 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for eco-friendly trade show swag, onboarding kit branded items, wholesale promotional hats, and event sponsorship swag, for clients like technical schools, public colleges, semiconductor manufacturers, and ambulance companies. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A union made pro style hat carrying a union bug — one of the few contrast back structured cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a team cap and a structured hat.

USA Made Mesh Back Five Panel Trucker Snapback - Contrast Mesh Back - Union Made

# 5CMSPO70 15 day production time$10.58 - $11.50 | Min Qty 24

A union made trucker cap cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown with a breathable mesh back. It closes with a plastic strap snapback tab, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a mesh back trucker hat. The color treatment is a contrasting mesh back. 64 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for high-end corporate gifts hats, client appreciation swag, team building prizes, and convention booth swag ideas, for clients like car washes, field organizing companies, blood donation centers, and pharmacies. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. An american made trucker cap carrying a union bug — one of the few snapback trucker hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a snapback mesh trucker cap and a mesh back trucker hat.

USA Made Mesh Back Dad Adjustable - Solid Color - Union Made

# 6CMUVE75 15 day production time$12.03 - $13.08 | Min Qty 24

A union unstructured cap cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel unstructured crown — the dad cap shape with a breathable mesh back. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is an unstructured dad trucker cap. The color treatment is solid color throughout with a matching mesh back. Eyelets are embroidered, not metal. 25 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for client holiday gift ideas, B2B swag ideas, event sponsorship swag, and executive holiday gifts, for clients like visiting nurse associations, employment lawyers, polling companies, and super PACs. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. An American made mesh back cap carrying a union bug — one of the few adjustable unstructured hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a solid color dad hat and an unstructured dad trucker cap.

Union Made Stretch Twill Prostyle Stretchfit - Contrast Front - USA Made

# 6CSSEE80 15 day production time$16.10 - $17.50 | Min Qty 24

A usa made fitted cap cut and sewn in Newark, New Jersey from stretch-fit poly/spandex, built on a six-panel structured crown, the shape we call prostyle. It closes with a stretch-fit back and no strap at all, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is an American made pro style hat. The color treatment is contrasting back, visor, button and eyelets. Eyelets are embroidered, not metal. 42 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for trade show giveaway hats, B2B referral rewards, executive gifts promotional items, and eco-friendly trade show swag, for clients like ERP providers, food processing companies, lobbying firms, and workplace safety training companies. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A promotional hat carrying a union bug — one of the few stretch fit baseball cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a promotional baseball cap and an American made pro style hat. Also listed under: promotional fitted.

USA Made Twill Prostyle Slide Buckle - Solid Eyelets - Union Made

# 6CTSTE45 15 day production time$13.16 - $14.31 | Min Qty 24

A twill structured cap cut and sewn in Newark, New Jersey from cotton twill, built on a six-panel structured crown, the shape we call prostyle. It closes with a fabric polo strap on a metal slide buckle, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a twill athletic ball cap. The color treatment is solid color throughout with embroidered eyelets. Eyelets are embroidered, not metal. 36 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for 5k participant gifts, wholesale promotional hats, top sales performer gifts, and promotional gifts for clients, for clients like dialysis centers, teamsters, medical device companies, and industry associations. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A twill mid profile cap carrying a union bug — one of the few twill team baseball cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a bulk slide buckle cap and a twill athletic ball cap.

Union Made Twill Five Panel Adjustable - Solid Color - USA Made

# 5CTSVO35 15 day production time$11.17 - $12.14 | Min Qty 24

A union velcro back cap cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a USA 5 panel cap. The color treatment is solid color throughout. 36 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for employee appreciation gifts, sales incentive program gifts, sales team rewards ideas, and promotional items for golf tournament, for clients like political campaigns, wellness centers, event managers, and construction firms. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A twill 5 panel hat carrying a union bug — one of the few twill five panel cap options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a bulk velcro back cap and a USA 5 panel cap. Also listed under: twill five panel adjustable.

USA Made Twill Five Panel Adjustable - Two Tone - Union Made

# 5CTSVO30 15 day production time$11.17 - $12.14 | Min Qty 24

A USA 5 panel hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a 5 panel hat. The color treatment is contrasting button and visor. 46 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for corporate holiday gifts for clients, 'say thanks' gifts custom hats, charity 5k swag, and product launch giveaway bundle, for clients like resorts, medical labs, military contractors, and construction firms. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A 5 panel cap carrying a union bug — one of the few twill adjustable five panel hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a twill classic 5 panel hat and a 5 panel hat.

USA Made Twill Five Panel Adjustable - Contrast Sandwich - Union Made

# 5CTSVE50 15 day production time$13.04 - $14.18 | Min Qty 24

A USA 5 panel hat cut and sewn in Newark, New Jersey from cotton twill, built on a five-panel structured crown. It closes with a hook-and-loop Velcro strap, so one order covers a whole team with no size breakdown to manage and nothing left over in the wrong sizes. This is a high crown 5 panel hat. The color treatment is a contrasting sandwich visor with contrast button and eyelets. Eyelets are embroidered, not metal. 42 stock color combinations are held, so the same style covers several programs without a new setup and a repeat order in another color needs no new artwork. Decoration. Embroider the front, visor top, back, back arch, left side, right side, or the Velcro strap, at any stitch count up to 12,000 stitches and beyond. Heat-seal patches are available PVC-3D, embroidered, leather, printed, and woven. Heat transfer comes in 2.5" x 2.5" and 4.7" x 2.8", full color or one color. Finishing. 6 stitches on visor, 8 stitches on visor, back opening flag label, distressed visor rips, four sided label sew, printed seam tape, sew down customer-supplied patch, and two sided label sew. Ordered for bulk employee holiday gifts, marketing swag that works, non-monetary sales incentives, and high-end corporate gifts hats, for clients like gubernatorial campaigns, ERP providers, real estate attorneys, and police departments. Made on demand in Newark, New Jersey. 24-piece minimum, 21-day production. Union label, made in USA, ESG compliant. A baseball hat carrying a union bug — one of the few twill adjustable five panel hat options made start to finish in the United States, in a factory a buyer can visit. Ships blank, or decorated in house before it leaves the building. Also listed as a sun hat and a high crown 5 panel hat.

Hammond Greetings & Promotions © 2026, All Rights Reserved